Tuning RAW HM1000x Regulator's Outer Body O-Ring Size

[SpiralGroove]

Does anyone know the RAW HM1000x's - Regulator's Outer Body O-ring Size?

The Rapids and TM1000's used the BS015, but NOT the HM1000x, due to it's larger regulator Stem, Thread Size.

Not buying another RAW O-ring kit for $32 just to get two of these.

 

[Airgunmann]

Huma might know they offer a reg for the larger one also I'll look and see

 

[Airgunmann]

Are the other metric be better off buying a generic metric kit on line or taking it hardware store to match it up or try to 32 bucks for orings is a bit steep 

 

[SpiralGroove]

Hey Airgun, I grew inpatient and slapped in a metric #113 Buna and she holding air - also had to resort to my official RAW/Airforce purchased bottle o-rings as the BS111 equivalent ordered from theo-ringstore didn't work -> dang-nabbit - bought 100 of them.

 

[Airgunmann]

Yeah good to hear the bottle orings are large and I ended buying 5 pack from raw tried several other sizes that I had laying around and none of them would seal for me 

 

[Green_Yamo]

What size are the bottle o-rings?

 

[SpiralGroove]

https://www.airgunnation.com/topic/raw-parts-list/#post-617078

 

[Green_Yamo]

https://www.airgunnation.com/topic/raw-parts-list/#post-617078

Thank you!

 

[corny]

This is the bottle oring. 150 cost $3 at orings and more.

these work, I can vouch for it 



$0.020 USD

 

[corny]

I ordered 100 of each oring from the link above….but the reg body oring isn’t correct. It’s the only one that I saw that doesn’t fit. 

 

[Green_Yamo]

Did anyone ever find out the exterior reg body o-ring size. Of course, now I have a leak here : p I'd like to order some of these, and some of the bottle o-rings.

 

[SpiralGroove]

Hey Yamo,

I ordered a few from RAW and then measured them @ 1.75mm x 16mm (CS x ID); ordered 50 1.80mm x 16mm (70 durometer) from oringsandmore for $8.05 including shipping.

The shipping was $5.55 !!!

That should do it ....

 

[Green_Yamo]

Hey Yamo,

I ordered a few from RAW and then measured them @ 1.75mm x 16mm (CS x ID); ordered 50 1.80mm x 16mm (70 durometer) from oringsandmore for $8.05 including shipping.

The shipping was $5.55 !!!

That should do it ....

Perfect, thank you!!!