I purchased a .30 hm1000x and it came with one mag. One $72 dollar 9 round mag. Mind you I'm not complaining....2k airgun after all. That aside, I've sourced a super cheap alternative. The 7 round gauntlet 30 mag @ $11 dollars. When surfaced down to .672" ish the mag will ride on either side of the action with a slight friction fit. The semi floating pellet probe will align the whole affair and It feeds flawlessly. Even with the inertia of 68gr slugs...no problem. Sizing the mag is simply accomplished with 150 grit paper on a granite plate or counter top. About 10-12 even swipes is all it takes to get around .672" (your mileage may vary). Go slow and test fit last couple of swipes. If you try this post results.
Raw hm1000x alternative magazine
- Thread starter cyknife
- Start date
Good to know. Thanks.
Certainly not a dollar savings at $99 but these mags hold 25 rounds for the RAW in 30 cal.
Certainly not a dollar savings at $99 but these mags hold 25 rounds for the RAW in 30 cal.
Upvote 0
Some one could probably print you one if you sent them yours and it would fit nicer and be cheaper probably
Upvote 0
Probably ... Last project really taking a bunch of time, underestimated its complexity... But more products on the pipeline....
Upvote 0
Well the idea behind the Cheap gauntlet mag was simple expediency. Under 12 dollars, a few swipes on an abrasive and Pow! No programming or spring making. It fits both sides and is more compact than the stock mag. Its one of those "Easy Button" solutions that works.
Upvote 0