I have a RAW chassis with the original butt, I know a lot of owners have changed theirs but I don’t mind it apart from two things, the rubber plate moves about on the extension leg and the leg flexes in the butt.
The rubber butt plate was an easy fix, I removed the two location screws that hold the rubber pad in place and with carefully application of super glue I attached it the pad back onto the leg the I placed a washer under the location screw and reassembled,
The leg extension was another easy fix, I removed the long knurled locking nut and replaced it with two shorter ones, one on each side of the stock, this clamps it together much more tightly,
These two small modifications noticeable stiffen up the butt.
The rubber butt plate was an easy fix, I removed the two location screws that hold the rubber pad in place and with carefully application of super glue I attached it the pad back onto the leg the I placed a washer under the location screw and reassembled,
The leg extension was another easy fix, I removed the long knurled locking nut and replaced it with two shorter ones, one on each side of the stock, this clamps it together much more tightly,
These two small modifications noticeable stiffen up the butt.
