Rattling in my FX Impact bottle

[Patrick]

Hey guys.

today I’ve noticed some slight rattling in my Impact bottle when I’m turning my gun.

what could that be?


Regards

Patrick

 

[Rj]

Had something similar, remove the bottle and make sure that's where the noise is coming from.

 

[Patrick]

Had something similar, remove the bottle and make sure that's where the noise is coming from.

ok I’ll do it.

what exactly was it on your Impact?

 

[Why]

Are you sure it's not coming from a loaded side shot magazine instead?

 

[Patrick]

Are you sure it's not coming from a loaded side shot magazine instead?

I don’t have a sideshot Magazin, but I’ll try tomorrow to find exactly from where it comes.

 

[biohazardman]

Impacts have a loose spring guide in the hammer spring. It is usualy what rattles when you move your gun around. Especially when moved from a muzzle up to muzzle down or vice versa.

 

[Patrick]

Impacts have a loose spring guide in the hammer spring. It is usualy what rattles when you move your gun around. Especially when moved from a muzzle up to muzzle down or vice versa.

Yes but that’s a short Klack, what I hear Is when something small rattles in a bottle.

 

[Why]

Be careful! If there's a rattle inside that bottle the only thing I can think of is that bottle valve pin may have come out of the valve when you are unscrewing it! and worst case that bottle is under full pressure so unscrew very SLOWLY! When you hear a hiss that won't stop then STOP! and leave it be until ALL of the AIR is released then it's safe to unscrew all the way.

 

[Jlacouturec]

it may be the hammer system, fx uses floating hammers!!

 

[Patrick]

Solved.

it was lead in the Moderator. Thanks guys for all the input!!