Captain's Log, Stardate 20200512
I removed 2" from the barrel as planned. Re-threaded on my lathe, and I started rummaging through odds and ends to cobble together a shroud to tension the barrel as a stop gap.
Well, I found that using the JSAR tensioner with a tapered end cap from an old 600mm FX Crown barrel kit, and a 500mm FX Dreamline seems to work pretty damn well, despite being an ugly Frankenstein setup
I removed 2" from the barrel as planned. Re-threaded on my lathe, and I started rummaging through odds and ends to cobble together a shroud to tension the barrel as a stop gap.
Well, I found that using the JSAR tensioner with a tapered end cap from an old 600mm FX Crown barrel kit, and a 500mm FX Dreamline seems to work pretty damn well, despite being an ugly Frankenstein setup
Upvote 0