hi, someone knows how to increase or decrease the pressure on my regulator, i shoot 25.4 gr @915 and my reg. Is @145 bar, i want to bring it down to 130bar, someone knows?? (Video, links, pictures???)
Yes i did, but the minimum speed with 25.4 gr is 915... i want the reg like my edgun, i have it in 125bar and i gain more regulated shots!"Greisdor"Have u tried to adjust the hammer spring To reduce the FPS ? It’s a bit envolved to adjust the reg.
JR
thank you very much my friend"spysir"Simply a matter of the amount of compression on the bellvile washer stack. This can actually happen with your meaning too in sone cases if tinkering.
"I" would highly recommend a pressure gauge.
Found some nice pictures right here on AGN ( search can be great here):
http://www.airgunnation.com/topic/at-long-last-rapid-air-weapons-hm1000x-25/page/3/
I would go for turning the brass knurlded nut piece first, that may or may not be the correct way to go about it.
It really is that simple.
Please keep us posted! And if you could more pictures never hurt anyones understanding of how these things work.
John