Tuning rainson edge out for delivery

IMpaitently waiting for the ups dude to drop off my rainson edge x with .25 & .22 barrels

found some info on it,but not alot
so ill be a guinea pig lol

cmoooooon ups lol

rai-edgex22syn.png
 
I have been on the fence on one of these as well. I will be excited with you. Lol

its here,and from what ive seen so far,
just from handling it working the action and removing the barrel,
im in love lol

it feels really well made and the transfer port
(at least on the .25 barrel that was installed)
looks like the slug transfer port on my impact.
(y)

stay tuned ill be tearing it down further to adjust the trigger and check the hammer spring adjustment.

heres a pic of the .25 barrel transfer port

20230720_122718.jpg
 
i will say,
if you buy the gun,
get the barrel band from them too.

with the shroud on it touches the bottle without the included silencer installed.

no biggie as i plan on running it without the shroud as it doesnt have any airflow back into it,
so its just for looks.

i will say the included silencer quiets it better than my donny tatsu,
but it weighs a TON.....A TON!!
 
  • Like
Reactions: 1handwill.gc
trigger out of the box was a long heavy pull
with no discernable second stage and an unpredictable break.

so i pulled the stock,
and since there are no instructions anywhere for adjusting the trigger,
i just dove in and figured it out :)

added a lighter weight trigger return spring,
figured out what the screws did,
and now it has a decent first stage albeit a bit heavier than i would have liked,
with a hard stop at the second,
and a really crisp break with no creep before the break,
im diggin it (y)

shes doing 910-915fps with 18gn jsb heavies.

dont have 50yds to shoot in my yard,
so i have her out on the porch getting it hitting where it should at 13yds with a 50yd zero
(man i love chairgun lol)

20230721_124142.jpg