Questions on Huma gauges for FX Impact 11

I have those gauges and I had the same question that you have, so I emailed them.

They replied that you should always use the 300 bar one for the bottle and never the 250.

Because if you exceed the 250 bar when filling you go beyond the capacity of the gauge measuring, and that can mess with the precision of it resulting in possible non accurate measurements after that.



For the reg any is good because obviously you won't exceed anything.



Good luck!
 
they make a round
1597110272_2621862505f31f8001b7ca4.86969105.JPG
 gauge also 300 bar very easy to read, trenier outdoors has them 
 
I have those gauges and I had the same question that you have, so I emailed them.

They replied that you should always use the 300 bar one for the bottle and never the 250.

Because if you exceed the 250 bar when filling you go beyond the capacity of the gauge measuring, and that can mess with the precision of it resulting in possible non accurate measurements after that.



For the reg any is good because obviously you won't exceed anything.



Good luck!

Yeah good point i didnt think about that haha