Questions for Vulcan/Vulcan2/Vulcan Tactical owners

[milacik]

thats the only way to reduce the transferport size. by clipping it deliberately.

I would have bought the Vulcan 2 but for some stupid reason they did not put a power adjuster on it. Funny thing is their dart tranquilizer version had it included!

By power adjuster i dont mean the hammer spring adjuster of course. Thats something else unrelated.

 

[Raptor660]

Ahh okay, now I get it!

power adjuster like on some of the fx guns, that would have been nice. Every air gun should have that.

i read that .177 cal gives 150 shots and 22 cal gives about 90 shots is that right?

how many shots do you get?

 

[Lowkey]

In May 2018 I purchased a Vulcan tactical with the side lever cocking, and it shot so good In July 2018 i purchased my Vulcan 2 tactical from tony at talon tunes, and added a Donnie FL moderator, because it is a little loud without.. and this is what it can do at 46 yards .... enough said

 

[Raptor660]

Lowkey 

that is some really nice groups!

wenn I started this tread, I was set on a bulpup Vulcan2 or Wildcat mk2 but now that Vulcan Tactic really grows on me. I really like the adjustable cheek piece and adjustable but.

 

[Raptor660]

I just wanted to thank everybody for help and answers, it’s much appreciated 

after much thinking and video watching, I ended up ordering the Wildcat mk2.

 

[NickT]

Just got to the end of this thread and thought it was a hilarious punchline that, after all the back-and-forth about Vulcans, he ends up buying a Wildcat...

 

[zx10wall]

He was probably thinking why in the world would I rotate the barrel. Could just tune the gun properly for less report. I do like the Vulcan myself. 

Have fun with that Wildcat. 

 

[thwakkk]

Turning the barrel will change the alignment of the transfer ports restricting the air channel. I bought a used Vulcan from AOA and when trying to remove the shroud I saw the barrel turn. I called them and they were willing to work with me but I could tell they thought I had simply used excessive force and stripped the barrel indexing screw out of the barrel divot. After some difficulty getting the cap off of the index screw I saw I had no index screw. I was able to find a screw that would work and the barrel is now aligned and secure. Doing some research I was lead to believe some didn't have an index pin to center the barrel but can't state that as fact.

I'm new to the Vulcan and what I know about it is primarily based on the following link. Two videos show barrel removal/installation.

https://www.ernestrowe.com/