I had some Hawke rings for my R7 but they do not fit the dovetail properly. Any
ring or one piece suggestions. I'd prefer droop compensation (even though members
have said there R7 doesn't have droop issues) just in case mine does. Another question
I have pertains to the single forearm screw. Is the double star lock washer really
necessary? Do you really need the washer under the steel cup that contacts wood ?
I pulled the stock off my new R7 and used Loctite Blue on all the stock fastners.
Torqued the forearm screw to 25 inch lbs and the same for the forward trigger guard
screw. The rear trigger gaurd screw was torqued to 12 inch lbs.
ring or one piece suggestions. I'd prefer droop compensation (even though members
have said there R7 doesn't have droop issues) just in case mine does. Another question
I have pertains to the single forearm screw. Is the double star lock washer really
necessary? Do you really need the washer under the steel cup that contacts wood ?
I pulled the stock off my new R7 and used Loctite Blue on all the stock fastners.
Torqued the forearm screw to 25 inch lbs and the same for the forward trigger guard
screw. The rear trigger gaurd screw was torqued to 12 inch lbs.