i have one coming in the bullpup. is this platform built around the jsb 25 gr pellets? if so how fast can you push them? gun is rated at 47 ft/lbs but could you get them flying at 55 accurately? tia
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
question on dreamline 25
- Thread starter steppenwulf
- Start date
Pellet liner "A" is what the FX rifles ship with, most likely. So JSB pellets are what they will most likely be the most accurate with to start out
I don't know the max power of the DL platform. 55fpe is quiet a bit. If it's anything near the output of the Crown, you should be able to get 50fpe at high reg pressure, say 150bar.
I was shooting 953fps with the 25gr Kings from a WC MKII, and they were nearly 1" at 100yds.
I don't know the max power of the DL platform. 55fpe is quiet a bit. If it's anything near the output of the Crown, you should be able to get 50fpe at high reg pressure, say 150bar.
I was shooting 953fps with the 25gr Kings from a WC MKII, and they were nearly 1" at 100yds.
Upvote 0
I agree with Bob_O that JSB would be the most accurate with that liner. INMHO 55fpe wouldnt be attainable accurately in that specific platform, but you never know until you try.
Upvote 0
Gaberossi has a Streamline shooting 59 fpe with the 34g. Close to the same gun. https://www.airgunnation.com/topic/100yd-shooting-at-the-local-meet-shoot/
Upvote 0
If you're willing to go to 160bar or higher and add hammer weight, it's very possible you could make 55fpe from the DL.
Just know that shot count will easily be cut by half.
Just know that shot count will easily be cut by half.
Upvote 0
I have a .25 in the lite reg is stock at 110 bar hammer at min and i get right about 880 fps with 25.4 gr but i have never adj the reg im getting about 45 shots on a 220 bar fill si i could see turning the reg up and getting 53 to 55 I just like my shot count
Upvote 0