Is the magazine deep enough to fit EunJin 43gr pellets ?
Also what bullets your gun shoots well ?
Thanks
Also what bullets your gun shoots well ?
Thanks
Question for Huben .25 owners.
- Thread starter Nomadic Pirate 66
- Start date
I don't have any Eunjins left from 15+ years ago.. I shoot 44 gr .254 avs slugs and they are very accurate. Might order a small batch of .253's just to see what they fit like as .254's are pretty tight in the chamber. The AVS flat base 44gr are about 10.2 mm and the Huben total chamber depth is about 10.9mm on my 2020 ..They should be the same pre and post 22 versions. (maybe go with a measurement or 10.85 to be safe) Thinking of getting one Manny?..
Upvote 0
Thanks,
I Pre-ordered the .25 Pistol and I have a ton of EunJin 43gr left, would be super sweet if they chamber and shoot decently.
Upvote 0
Well, well I do have a caliper so I'll check the EunJin lenght.
Wander is anyone used EunJin out of a Huben, I'll be interested to hear how they do.
Wander is anyone used EunJin out of a Huben, I'll be interested to hear how they do.
Upvote 0
I second MACTENs statement. I too shoot the AVS .254 slugs, although I think mine are closer to 47 grains, about as big as you can go, flat base. I had less success with the .253s. I just sent some to Corbin to copy and make a swage die for, should have it soon
Upvote 0
Too bad you don’t cast Manny. I have the 8 cavity MPMolds mold that I never use.
Regards,
Roachcreek
Regards,
Roachcreek
Upvote 0
I will, I will eventually, I have several molds stashed away and a ton of lead, one day I will cast.
Upvote 0
Just curious id you measured them yet? I remember them being pretty long. Shot them out of my Career III 3000 if memory serves.
Upvote 0
Perfect so they will fit, it would be awesome if they shoot well ( those Korean pellets are always oversised ) I have a big stash of hem
Upvote 0