Tuning Question for FX owners

Arnie, 

Yes, the gauge swap will work. 

All FX gauges have the same threads, 1/8" BSP. 

The "smaller silver gauges" such as the Dreamline gauges are 23mm (Uses a 22mm wrench/socket)

The gauges that are typically at the end of the airtube, or on the Crown/Royale, are 25mm (uses a thin 11mm open end wrench)

The Impact MKII gauges are 28mm (Uses a 27mm wrench/socket)



Buck
 
Can I use a gauge from an FX dream-tac...and install it on an FX Impact MK1? Will it work? It’s a little smaller than the usual FX Impact gauge.

Hi Arnie, 
If you have any more questions for our technicians, please feel free to call or email into our service line This way they can better assist you and give you direction if you have any difficulties with the gauge or any other modifications. 

Our email is [email protected], or you can call in (866) 639-0772 between 9 am – 4 pm EST. 



Regards,

FX Airguns USA
 
Arnie, 

Yes, the gauge swap will work. 

All FX gauges have the same threads, 1/8" BSP. 

The "smaller silver gauges" such as the Dreamline gauges are 23mm (Uses a 22mm wrench/socket)

The gauges that are typically at the end of the airtube, or on the Crown/Royale, are 25mm (uses a thin 11mm open end wrench)

The Impact MKII gauges are 28mm (Uses a 27mm wrench/socket)



Buck

Thanks to all the responses!