Have any of you know how far into the shroud of your Prosport is the first baffle start from opening of shroud. Basically how far is the 1st baffle from tip of muzzle/shroud
Prosport baffles
- Thread starter josh3rd
- Start date
Dumb question: Are you referring to the Air Arms ProSport springer? I don't think that one has any baffles. I own an Air Arms TX200 HC and that one has baffles and a removable shroud cap that can accept an adapter for a moderator. When I researched the TX200 series, that was one of the reasons I went with the HC and not the ProSport.
If you are referring to a different rifle, my apologies for the mistake.
If you are referring to a different rifle, my apologies for the mistake.
Upvote 0
Nah brother,the Prosport has a removable end cap and has like 4 or 5 "baffles" inside. Just out of curiosity, when removing your end cap, how far is the 1st baffle in your TX
Upvote 0
Dumb question? Really?
Josh,
I have never had the baffles out of my rifle however the position of the end cap on them has shifted several times from maybe an inch in to right up almost even with the end of the shroud. That front plastic piece is fairly tight but it will move. When it moved up close to the end of the shroud I just pushed it back in a little. I have not done any extensive testing but it seems as if it has not affected the accuracy.
You could probably email AirArms directly and they would most likely respond.
Rick B.
Josh,
I have never had the baffles out of my rifle however the position of the end cap on them has shifted several times from maybe an inch in to right up almost even with the end of the shroud. That front plastic piece is fairly tight but it will move. When it moved up close to the end of the shroud I just pushed it back in a little. I have not done any extensive testing but it seems as if it has not affected the accuracy.
You could probably email AirArms directly and they would most likely respond.
Rick B.
Upvote 0