Tonight I started my Bulldog build. It was basically stock when I received it other than a power spring and de-pinger. I am going vinyl wrap it in Kryptek Typhon to give it a little different look. The wrap looks much better in person than the sheet in the picture below, there was some glare coming off the vinyl. I will do a full polish on the barrel and probably re-crown it. For power mods, I will open up the valve some as it’s really small and port the barrel to match it. I’ll run another hammer and valve spring as well. I’ll do some work on the trigger and polish it up along with the hammer and install a steel charging handle. It’s also getting an extended high pressure air tube for more shots and power. I have a really nice Crimson Trace scope that will be going on top when its’s done. I am currently waiting on some parts so it will be a few weeks until it’s completed. I’ll update this periodically as progress is made. Pictures are below from tonight’s disassembly.
