Would anyone know what the factory settings are, hammer throw and hammer spring tension ?
Prod
- Thread starter kayaker
- Start date
I wrote down 7 turns on throw and 4 on hammer spring force. But I also tried different throw settings and it didn't seem to make a difference until I did a bstaley tune. I got maximum velocity about 2400 psi - that would be another check on the tune.
Upvote 0
Where did you get info on the Staley tune? What benefits did you realize, if you did that to yours?
Upvote 0
Here is a link for the BStaley tune.
www.tapatalk.com
Yellow Airgun Forum Archive-Poor man's M-Rod, P-rod, etc. "Regulator" explained (Long) - Original Bstaley Mod Topic
First of all, despite the title, this mod is not a Regulator at all. Truth is I don't really know what you would call it. Maybe one of you can com
www.tapatalk.com Upvote 0
They are 4 throw, 4 Hammer spring. Sent to me by Crosman when I first got my P-rod and asked Crosman.
Upvote 0
Thank you Slim!Here is a link for the BStaley tune.
Yellow Airgun Forum Archive-Poor man's M-Rod, P-rod, etc. "Regulator" explained (Long) - Original Bstaley Mod Topic
First of all, despite the title, this mod is not a Regulator at all. Truth is I don't really know what you would call it. Maybe one of you can com
Upvote 0
Thank you will give it a try, working on another project gun with the crony at the moment. Sorry for the late reply I forgot to hit post yesterday
Upvote 0
Thanks for the link SlimHere is a link for the BStaley tune.
Yellow Airgun Forum Archive-Poor man's M-Rod, P-rod, etc. "Regulator" explained (Long) - Original Bstaley Mod Topic
First of all, despite the title, this mod is not a Regulator at all. Truth is I don't really know what you would call it. Maybe one of you can com
Upvote 0