PROD Safety Won't go Safe

[Rosco]

Like the title says - Had the gun apart changing valve, spring etc.. Put it back togeher and noticed the safety wasn't engaging. It toggles back and forth and can feel the normal reistance. Didnt have the trigger assembly apart just removed grip and assembly from tube. The spring and ball bearing appear to be there. Is there a step I am missing when reassemble the handle/trigger assembly back togeher?
Any help appreicated.

 

[toku58]

So the gun fires even with the sfety on?

You need to adjust the 1st and second stage screw in the trigger. 
They are really loose so they don't keep their adjustment.
What I did on mine was remove them and wrap them with teflon plumbers thread tape. And then adjusted them. Works great!

Or you can use some loctite!

 

[toku58]

So did this fix your problem??????

 

[Rosco]

The ball had popped out and had to adjust screw 1 & 2. GTG now