Problem with AEA Terminator

[the roofer]

New to the PCP world, I have a AEA Terminator 30 caliber that has a problem in that it will no longer charge. I had an O ring on the probe that went bad. Replaced that and when it still would not work ordered a new one. Still not working. I'm a danger to myself with a screwdriver, no mechanical skills. I'm guessing a tiny piece of the O ring that went bad is stuck in the receiver? Clueless. Scott

 

[darylm]

Try holding the bolt all the way back and filling it.

 

[Sicumj]

It won't fill because air escapes or does it go over pressure? If air is leaking where?

 

[Ryhno85]

New to the PCP world, I have a AEA Terminator 30 caliber that has a problem in that it will no longer charge. I had an O ring on the probe that went bad. Replaced that and when it still would not work ordered a new one. Still not working. I'm a danger to myself with a screwdriver, no mechanical skills. I'm guessing a tiny piece of the O ring that went bad is stuck in the receiver? Clueless. Scott

Could be your valve pin. They break at times

 

[Scotty1]

Try holding the bolt all the way back and filling it.

Thisis a great place to start!

 

[Ryhno85]

Could be your valve pin. They break at times

Does it make a puttering sound after so much air is in the tank? If so it’s what I said above.