How do i print off the Chairgun trajectory chart on a mac computer. All i can print is what is showing on the screen and it is very small and the gray color of the chart prints out and you can hardly see the numbers. I know almost nothing about an apple computer.
Printing trajectory chart
- Thread starter Scalf
- Start date
It's not really meant to be printed, so I think you've done about the best you can.
Simplest way is to look at Chairgun, then DRAW it on paper. You can use the vertical margin line toward the left of a piece of regular old notebook paper as a vertical and the blue lines as hold-overs.
Simplest way is to look at Chairgun, then DRAW it on paper. You can use the vertical margin line toward the left of a piece of regular old notebook paper as a vertical and the blue lines as hold-overs.
Upvote 0
I figured out how to print the table out. I can't change the font size.My Sigtron scopes are .18 inch clicks at 100 yds and
Chairgun has a way to use this number. I need to print out the header but it was late so i went to bed. i will have to shoot and see if it is right. With a zero of 38 yds the clicks are right for 75 yds which is a good sign that it is close at other ranges.
Chairgun has a way to use this number. I need to print out the header but it was late so i went to bed. i will have to shoot and see if it is right. With a zero of 38 yds the clicks are right for 75 yds which is a good sign that it is close at other ranges.
Upvote 0
I shot my FX Boss at 60 yards and it seemed to be very close. It is hard to tell if it is exact because the center of the group will move around a little bit. One click at 60 yds is only .11 inch so it would be hard to see if you were off a click either high or low. I cant change the font size so i will use a copy machime to shrink it up for a range card to carry with me. I will laminate it so it won't wear out or get wet.
Upvote 0