The pressure gauge on my 0.22 Cayden is stuck on 2000 psi. Pyramyd carries the gauges but are out of stock. Where else would be a good source for a new gauge? I see some cheap ones on Amazon but am a bit hesitant to try them.
Thanks.
Thanks.
Benjamin Pressure Gauge
- Thread starter BassMan
- Start date
Does Pyramyd have any other gauges that fit? Utah Air, Airguns of Arizona, The Pellet Shop, High Pressure Pneumatics, ..... ? All you need to know is thread size and taper or not and dial diameter.
Upvote 0
Bourbon tubes(the spiral behind the guage face that moves the needle.) order 2 imo. I don't know what the future holds for crosman and benjamin. Daisy seems to be really sticking it to those brands with the acquisition.
Upvote 0
I have a Benjamin Kratos and an Akela. The gauges on these are as cheap as they come. Amazon gauges would be OK but be sure to get the correct thread.
You also might try Airgun Revisions https://www.airgunrevisions.com/. They sell refurbished Benjamin Craftsman rifles and stock some spare parts.
JackHughs
Upvote 0
McMaster-Carr supply has High Pressure small diameter gauges with 1/8 NPT thread for about $20.00 don't know if this helps you in any way:
www.mcmaster.com
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
Upvote 0
Another option for you.
SEKHMET Best PCP Digital Pressure Gauge
Minimum High-Pressure Digital Gauge with Algorithm
www.sekhmetonline.com
Upvote 0
And they'd actually be decent. I haven't gotten junk stuff from McMasterMcMaster-Carr supply has High Pressure small diameter gauges with 1/8 NPT thread for about $20.00 don't know if this helps you in any way:
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
Upvote 0
As always, check the thread diameter and pitch before ordering. I read somewhere that the gauges installed on Kratos, Akela, and Caydon rifles use a 10mm x1 thread. Call Airgun Revisions for accurate information.
JackHughs
JackHughs
Upvote 0
Thanks for the replys everyone. I think I will reach out to Airgun Revisions. I can't seem to be able to find any info online about the thread size. Apparantly, at some point the thread size changed on the Caydens.
Upvote 0