Presslug slugs ?

[Mtn.Man]

Does anybody know what the slug profile is on the slugs produced with the presslug?
Corbin states theirs are 2S. GMI's are 3S, but I can't seem to find what the Presslug produces.
Thanks in advance.

 

[RoosterCogburn]

Measure them.

Caliber diameter ÷ slug length if there were not a hollow point. Where the ogive angle.would intersect
Dia÷ the intersection angle of the ogive from the shank past the hp. If the slug were a Spitzer is ballistic profile.

So a 2s .217 is .434"

From what I hear God have mercy on your soul if you ever need support with PS

 

[RoosterCogburn]

BTW the answer is 2.5S secant ogive for presslug
"Presslug brand swaging press. This tool forms lead into a secant ogive slug with a diameter of .2173 inches, also known as 5.52mm. "

 

[Mtn.Man]

BTW the answer is 2.5S secant ogive for presslug
"Presslug brand swaging press. This tool forms lead into a secant ogive slug with a diameter of .2173 inches, also

BTW the answer is 2.5S secant ogive for presslug
"Presslug brand swaging press. This tool forms lead into a secant ogive slug with a diameter of .2173 inches, also known as 5.52mm. "

I don't have the slugs to measure so... Thank you!