predom lucznik 170

[vrijheid]

i found and bought a predom airgun .looked for some time for one.love how it looks.
problem: took it apart to clean and oil, that was no problem.however upon putting it back together
it is impossible to get sear lever back in place. no solution on the net. pesky little spring
any body out there with some insight? love to go back to plinking
thanks

 

[Roboslug]

Check out post #16 - #19.

Predom Lucznik Model 70

I recently purchased a Predom Lucznik 70 from AoA. It's in great shape externally and AoA is great to deal with. I've been following Stevoo's recent comments on improving the performance of the Walther LP 53 and couldn't resist the "lesser" copy when one became available. There is very little...

www.airgunnation.com

 

[cosmic]

Use grease to hold springs in place..

 

[vrijheid]

Use grease to hold springs in place..

i used a drop of super glue
sure kept the spring from from flying

 

[vrijheid]

super glue was my comment
sorry learning how to navigate

 

[vrijheid]

finally found some time to put all back together pesky spring and all
tried out olympia domed pb free pellets 5.5 gr
got max 455f/s on my chromo quite surprising
pretty accurate at 10m
if only something can be done to fix that awful trigger

by the way anybody knows what that little stamp means at the right side of the .177mm stamp
i'll try to upload some pictures if i can find how to

happy plinking, johan