Polymags in Walther Reign magazines

[MOhunter]

Hey everybody, I was wondering if anyone out there has the same problem I'm having. My Walther reign (.25) seems to like the predator polymags. But occasionally, I have an issue with feeding through the magazine. I'm wondering if the plastic pointed tip of the polymag is catching somewhere inside the magazine, because sometimes it doesn't rotate (advance) to the next pellet. This is usually on the 2nd or 3rd round and all others seem to work fine in it. I'd kind of like keeping these for hunting use, but if they cause problems I may have to consider another pellet. Ideas? Thanks

 

[dizzums]

polymags are just cool .. tedious but maybe you could just touch the points down a bit on the face of a cutoff wheel ..

 

[MOhunter]

polymags are just cool .. tedious but maybe you could just touch the points down a bit on the face of a cutoff wheel ..

You know, I actually wondered about that. I might try it, but I don't wanna have to do that all the time. I anticipate I'll eventually have to switch pellets :^/

 

[Gerry52]

Polymags work just fine if you clip the tips with a nail clipper (easiest I've found). I've never seen any appreciable change in accuracy after doing so.

 

[MOhunter]

Polymags work just fine if you clip the tips with a nail clipper (easiest I've found). I've never seen any appreciable change in accuracy after doing so.

Now THAT is a great idea. Thanks!

 

[Gerry52]

So, I'm curious if you tried the clipped Polymags. What d'ya think? Did they work for you?

 

[beerthief]

You know, I actually wondered about that. I might try it, but I don't wanna have to do that all the time. I anticipate I'll eventually have to switch pellets :^/

to grind off a tip you would have to be Absolutely 90 degrees square a degree off and your pellet will fly any direction