Just having some fun plinking in the wind..it makes it interesting..winds were 14-28mph. Where's all the videos that USED to be posted on AGN?
https://youtu.be/mWKf8zQkHvE
https://youtu.be/mWKf8zQkHvE
Plinking with my LCS SK19 .22
- Thread starter Richieg
- Start date
Nice - had my Steyr Pro X 10 out today and my SK19.
I guess i didn't know it, but (MY) SK19 continues to cycle even when the magazine is empty for as long as i hold the trigger down. In semi-auto it stops when it's empty.
Wondering if other SK19 owners experience this continuous cycling of an empty magazine ?
I guess i didn't know it, but (MY) SK19 continues to cycle even when the magazine is empty for as long as i hold the trigger down. In semi-auto it stops when it's empty.
Wondering if other SK19 owners experience this continuous cycling of an empty magazine ?
Upvote 0
I have noticed mine will cycle in full auto or semi auto as long as I pull the trigger. It sounds different when fired with no pellet. It sounds kinda tinnier if that makes sense.
Upvote 0
Here you go...one I made awhile back. Looking thru a spotting scope and then my ATN Digital scope.
https://youtu.be/Ed9z_zF4mXs
Upvote 0
It's the nature of the beast, both SK and K1 will cycle a long as you pull the trigger. I find there is a different tonal sound when firing while empty.
Upvote 0
I have the LCS SK19 and it leaked. Sent it back to AOA and they fixed the leak and upgraded some GEN2 valve also. Other than that it's been good to go.
NOTE: Be careful if you send your LCS SK19 to AOA. They will put red lock tight on the suppressor and you will need heat to get it off. I was pretty pissed and called them. I hate that ugly suppressor that come with the LCS. I put a DonnyFL on there.
They said they red lock tight it because customers don't know what they are doing and mess with the barrel??? Did not make sense to me but whatever. If it ever goes back I will have a big note in there NO LOCK TIGHT !!! on my 2k airgun.
.
NOTE: Be careful if you send your LCS SK19 to AOA. They will put red lock tight on the suppressor and you will need heat to get it off. I was pretty pissed and called them. I hate that ugly suppressor that come with the LCS. I put a DonnyFL on there.
They said they red lock tight it because customers don't know what they are doing and mess with the barrel??? Did not make sense to me but whatever. If it ever goes back I will have a big note in there NO LOCK TIGHT !!! on my 2k airgun.
.
Upvote 0
My experience is the same. Bought the gun it leaked - just a little at first, then after a week or two audibly. Took it back to AoA who fixed it up (under warranty) and it hasn't leaked since. I've never had a jam or any other issue with the operating parts.
AND I had been blaming LCS for the loctite! Boy did they glob it on! About a tablespoon... Odd for a company that sells moderators and makes videos about how to work on your SK-19... Took about an hour of wire brushing and acetone to get the threads clean! I tried a shogun on, but couldn't tell a sound difference and the appearance of the factory can is fine with me, so that's what's on there now.
Edit: I've had mine for a little over a year.
GsT
Upvote 0
Yea the OEM suppressor works great. I just don't like the look of it. So I got a donnyfl adapter and a small can that is the same size as the barrel shroud. Looks much more clean cut. Performance between the original can and donnyfl is the same. I have a couple of spare ronin cans from donny and tried them and still don't hear a difference. No need for a bigger can on the end of the LCS.
Here is the grand baby shooting my LCS.
.
Upvote 0
Upvote 0