Other Pistols for "FIELD TARGET" .... share your Factory or Exotic pictures of them !

[jps2486]

The RAW is nice. The BRK is really good. I have my trigger breaking at 6 ounces. Accuracy is outstanding. Lots of shots at 20 FP and tons at 12 FP. In fact, I shared my pistol with another shooter at the last 12 FP match. It was a 60 shot match so we shot it over 120 shots plus I sighted in before the match all with one fill.

The .177 Pathfinder loves the 13.43 Redesigns at 815 fps for 20 FP and 8.44s at 795 fps for 12 FP.

The one pictured above is my .20. I shoot the 13.73 JSBs at both 20 FP (805 fps) & 12 FP (620 fps).

I hope to shoot with you one day, Cam. Still have that PP700 I got from you. It’s a shooter. Thank you for tolerating my bantering

Does your Pathfinder have the standard 10 inch barrel or did you install a longer one. You are allowed 15 inches in PFT, I believe.

 

[zx10wall]

My .20 is a 12” barrel. Factory is 10”.

 

[beerthief]

I do not have an interest in competing other than with my self even if we do get into arguments about scoring at times . But i really have an interest in a Crossman 1701 .

 

[pesty3782]

This one showed up on my doorstep last night at 8 P.M. Thanks Derrick @zx10wall !!!!! This morning got the scope mounted and started with a little sighting in...I sure hope I get everything done I want before Tuesday's morning pistol match.

Tony P.

 

[Bramezy]

My Prod. Getting ready to try some pistol FT this season.
Also have a custom 2240 with Lw .177 or .22.

 

[SteveV]

Just some old, roll your own type stuff, but fwiw, they did pre-date the P-Rod, 1701, &1720 -

 

[Franklink]

I'll play. I've shared photos of this one before, but I've also already seen photos of some of the other pistols shown here in various places.

1720t. Bought slightly used from @XSUltimate.

I call it "Bumblebee."

Stock as can be, minus the Steve Corcoran stock. I've never turned any adjustment screws, and if I remember correctly, neither did the previous owner. So that means it something like 8.5-9fpe. I've considered adding regulator and/or trying to get it closer to 12fpe but it just shoots so well as-is that I haven't made any changes.

Fun little gun to shoot, whether for fun or im a match a couple times a year.

Made a case for it a few months ago...

My son shooting it during a match...

Me shooting it on my back porch...

 

[BrazosbyNemo]

Posted this pic the other day but this is my CZ200 Van Halen 5150 FT pistol. Crazy accurate. I just don’t shoot enough pistol FT to be any good with it.

 

[steve123]

 

[cavedweller]

.20 scoped with a S-Tac 4-20x50 using a Daystate monorail. Easy eyebox and I can lock my elbows in solidly.
Thanks @Kerndtc thanks @Motorhead

 

[cavedweller]

Knowing Pistol FT is not for everyone who does shoot FT in the rifle classes, those who do participate in pistol FT matches are a mixed group of "Just for fun" and serious Pistoleros
So in the spirit of sharing and education with perhaps some sparking of interest in trying out this very fun and difficult miens of knocking down the steel .... What ya got ?
I'll start with where started in PFT @ 8-9 years ago and where at today ... been a fun journey no doubt !

View attachment 426116

View attachment 426117

View attachment 426119

View attachment 426121

View attachment 426123

Yes the barricade stop addition still must meet the measurement requirement of no more than 3” center of barrel to lowest point forward of the trigger guard

 

[cavedweller]

The angle of the original picture made the barrel shroud seem like it was a bit larger in diameter. Right at the legal limit, right where I run mine. I think I'm at 2.95". Looks like a fun rig and nicely adjustable.

I'm not sure if and when we may cross paths and shoot at the same pistol ft match but it would be fun to have some mano a mano fun with our rigs. I'd love to check one out and hopefully change my overall opinion from the past ones I've handled.

No brocock I've tried semi recently like the atomic has excited me whatsoever, crude trigger minimal shot count and meh accuracy. I see this has a nice bottle on it, probably 300cc+? Plenty of shots I bet!

As for the raw having nothing on it, really the only thing I could think of is an on the fly transfer port adjustment. Convenient for sure. The RAW is no slouch, equally accurate off a bench , and skilled shooter such as yourself could kick ass with either.

Cam

Does a barricade stop count in the measurement?

 

[Bander124]

I’m very ignorant to the field target shooting even more so with pistols. Looking through you alls pics has me wondering how they would handle in the field hunting. Has any of you used yours for hunting. That .20 raw has my interest.

 

[Kerndtc]

This one showed up on my doorstep last night at 8 P.M. Thanks Derrick @zx10wall !!!!! This morning got the scope mounted and started with a little sighting in...I sure hope I get everything done I want before Tuesday's morning pistol match.

Tony P.
View attachment 426922View attachment 426923

Nice rig! Totally dig that sidewheel too.

 

[pesty3782]

Nice rig! Totally dig that sidewheel too.

Gee wonder who designed it

Tony P.

 

[cavedweller]

Awesome day setting up an awesome shooter