Snowpeak Pinty Bullpup

Jump to latest Follow Reply
nobody1 said:
I decided to keep the bullpup.

I know it inside out now and would be a pity to waste that knowledge :)
I only have the rail issue to deal with.

I have 3D printed a moderator and single shot tray too.
Click to expand...
Would you be interested to print one of each for me and let me know how much will be? I’m all the way in Washington in Puyallup
 
Upvote 0
smythsg said:
Beautiful day today with no wind and sunshine about 63 degrees. Hauled out the Pinty Bullpup for another round of shooting off the golf tees but this time it was paintballs at 35 yards. Just like the last time at 50 yards with one inch balls, three tees set up, three shots, splash three paintballs. I'm loving my Bullpup!!!

On another note, I 3d printed a Picatinny Bidpod rail that was originally intended for a SPA P15 but fits the Pinty Bullpup perfectly:
( https://www.thingiverse.com/thing:5964116 ) Free download...
Click to expand...
Would you be interested in printing one for me as well?
 
Upvote 0
smythsg said:
A gentleman on the forum is making custom magazines for the Snowpeak P35 and has suggested that he would make magazines for the Pinty Bullpup if the intrest is there. Let me know if you would be interested in afterrmarket magazines for the Pinty Pup and hopefully he will take on the task!
Click to expand...
By the way, have you found anything about extra magazines for the Pinty
 
Upvote 0
tonka said:
my bullpup leaks while filling, holds no air, pinty told me to fill gun while submerged in water, seems like not a good idea, anybody have a idea to look for?
Click to expand...
Tonka, get you a small spray bottle, mix some dish soap and water. Spray it in spots while trying to fill. The leak. Will blow bubbles. Easiest way to track it down.
 
Upvote 0
Yes, I had several rifles. They do that, but I do believe it or not. I put a couple of drops off silicone oil and the adapter, then hooked the adapter to the tank or compressor next I cut the rifle and leave the lever open with the safety apply without closing the lever. I air the rifle up to at least 200 bar then I check it if it doesn’t get fixed the first time I close the lever shoot it once or twice while it still has a little bit of air in it then repeat same thing call it and leave back here to 150 bar and try again sometimes it’s taking me as many as three times. Are you trying to edit with the compressor or with a tank? Sometimes it works faster with the tank as you can force air a little faster, which helps the puppet vale clothes better
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu