Pellet molds

[bobtheshed]

So I recently purchased a mp mold for a .22 air rifle and found that the shots that come out are too big for my .22 air rifles. Now I did push them through the sizer they sent me but there still to big. So i set out to find another option and found one but the guy is not contacting me back about the pellet mold so I don’t know where to go or a honest place to find a way to make my own pellets at home I’m just trying to be self reliant and not spend money I don’t have any ideas on how to get a mold or make one 

I would love to make my own .177 pellets if I could but most say that will never work and I’m like how do we buy them if I can’t make them?

 

[Glem.Chally]

You can get a good little sizer from NOE molds, can get like 10$ bushings that go inside it and can get .217, .216 etc. Use that with a cheap reloading press if you dont have one. Maybe 70-80$ for all that.

I had custom dies made from LEE before I found the MUCH cheaper NOE option. 

I have the same mold and they shoot pretty well from a slug liner and my LW polygon, but they're heavy and need some serious HP if you want to sling them fast but even 750-850 shot pretty well, I'd say hunting accurate within 70y.

I have the .25 also but doesn't shoot as well as the .22 for me.

 

[Enkey]

You can get a good little sizer from NOE molds, can get like 10$ bushings that go inside it and can get .217, .216 etc. Use that with a cheap reloading press if you dont have one. Maybe 70-80$ for all that.

I had custom dies made from LEE before I found the MUCH cheaper NOE option. 

I have the same mold and they shoot pretty well from a slug liner and my LW polygon, but they're heavy and need some serious HP if you want to sling them fast but even 750-850 shot pretty well, I'd say hunting accurate within 70y.

I have the .25 also but doesn't shoot as well as the .22 for me.

Hi Glem

Noe makes custom dies like Lee?

Regards 

Enkey 

 

[DesertSilver]

Noe makes a sizing system that all you need to change are the bushing. I use this system for some 30 grain bbt slug for my.22 liberty which has a very tight barrel. Noe has bushing size down to.215 for the.22 cal slugs. The basic system is around$40 and then you just need to buy the dies and push rod for what cal you want to size. Buy a lee reloading press and you're in business.

 

[Enkey]

Noe makes a sizing system that all you need to change are the bushing. I use this system for some 30 grain bbt slug for my.22 liberty which has a very tight barrel. Noe has bushing size down to.215 for the.22 cal slugs. The basic system is around$40 and then you just need to buy the dies and push rod for what cal you want to size. Buy a lee reloading press and you're in business.

Okay. Thanks I have a press Lee

Regards 

Enkey 

 

[bobtheshed]

Thank you I heard of nomad before but never noe molds I knew I just needed to ask