Anyone used the Ballistol GunCer Gun Oil. Supposed to be Ballistol with ceramic additive to clean the barrel of a PCP or Springer.
Sure looks interesting.
Sure looks interesting.
That's what I use, the felt buttons with a hole thru the middle soaked lightly in Ballistol then rubbed in paper towels to remove excess Ballistol till clean then 3 dry patches after every tin of 500....Felt pellets and clp is as much as I care to do anymore for results with my stuff
I too use CLP for years on all my air and powder burnersFelt pellets and clp is as much as I care to do anymore for results with my stuff
It happened because of PB stuff and what I noticed with those for my habits.I too use CLP for years on all my air and powder burners
Ha, I thought after 40+ years of shooting I have seen all the cleaning stuff, never head of this. Will give it a try.a drinking straw in the moderator and patch worm
I use patch worm in everything and my benjamin marauder has the smallest magazine and it still works, I put a little bend in the line to get it in without snagging breech o ring and when the patch and plug are by it pushing a little to help guide it in smoothly ,I usually take barrel shroud off but if yours doesn't just simply unscrew try a strawHow would you clean the barrel of a suppressed shrouded Avenger X? Unfortunately none of the bore snakes will not fit in the breach, the little metal piece on the end is too large. I would guess this is the same for most magazine fed PCP. I have only cleaned it once from the muzzle with pads soaked in Ballistol but even that is not easy unless you remove the shroud. I would love to find some bore snakes that have a heavy end and fit!