Panthera Dual

[cra627]

Inquiring minds want to know what the shot count is now... Thanks.

Im hoping Thursday. Ill post the count

 

[woogie_man]

Are you also removing the rear bottle with all these parts listed? If you are just adding a front bottle you’ll just need adapter and washers -yes? Thats all I did. Very simple

Nope should be able to use the rear bottle as well.

 

[cra627]

Nope should be able to use the rear bottle as well.

 

[woogie_man]

Ok Ive not looked up all the parts you listed but as I mentioned previous post, all I bought was adapter and washers - no issues works great.

The rest of the parts are the valve system inside the threaded base.

 

[gizmo1974]

why not a pict on how to install frount tank in the pict cant see how it ataches

 

[cra627]

1) remove rail
2) remove brass plug and o-ring
2) install bottle adapter and bottle
3) fill with air
4) shoot gun

FX USA told me that FX Sweden has not yet provided a schematic so I ordered the Crown bottle adapter and washers.
(Update: the crown bottle adapter leaks at the block face on Panthera - I wont be using this adapter)
I believe the upper brass plug in pic is the valve location.
Ive shot 2 mags through since bottle install and all is well

 

[alinyus]

Got the Panthera set up with 580/300 today. Looking forward to the warm up next week -hopefully can get to the farm to stretch its legs a bit. 76yds is max at the house. So far the HN 38gr at 980 are winningView attachment 330291.

how many shots do you get out of it?

 

[R0B]

Thanks for posting all this info up.......very interesting. A front bottle is certainly of more appeal...........and a MK3 Crown based on it would remove money from my wallet..........

 

[Loff]

1) remove rail
2) remove brass plug
2) install bottle adapter and bottle
3) fill with air
4) shoot gun

FX USA told me that FX Sweden has not yet provided a schematic so I ordered the Crown/M3 bottle adapter and washers.
I believe the upper brass plug in pic is the valve location.
Ive shot 2 mags through since bottle install and all is wellView attachment 330551

In this video there is some explanation on internals of FX Panthera.

 

[cra627]

Thanks Loff

 

[cra627]

how many shots do you get out of it?

Ill let you know on 2/9

 

[Crossbow5]

I have a Panthera on the way. Could you tell me what magazine is compatible with the Pantera 22 and where do you get the covers for the magazine so it will fit

 

[woogie_man]

The Crown mags will work with the panthera, you will need to get the thicker cover for then though. Haven't seen any place that has those avaliable yet though.

 

[ddark]

https://www.carm-magazines.com/magazine-cover-for-fx-panthera.aspx

 

[cra627]

I have a Panthera on the way. Could you tell me what magazine is compatible with the Pantera 22 and where do you get the covers for the magazine so it will fit

I bought an Orion - works well the magnetic cover is nice and it dosent use an o-ring…

 

[carpmaster]

Bottle adapter 19659
Washers 11507 (2x)

are the same parts as the impact mk2

 

[gizmo1974]

looks great makes it look lots better i would remove rear tank if i had one

 

[cra627]

are the same parts as the impact mk2

Hate to say it, but at this point, I would not buy the 19659 adapter. I found it is not sealing on the face of the block, so I need to get some answers. So if you were thinking about the front bottle system, I’d hold off for a while or research on your own.

 

[carpmaster]

Hi @cra627
I asked you why, if you look at the part lists, impact mk2 and panthera, the valve has two different codes,but I don't know if the parts are the same or different . however I think to remove the rear adapter and screw it in front, I will use only one 700cc bottle.
I'm waiting for the panthera 600 in .22, it should arrive at the end of february

 

[cra627]

https://fxairguns.com/wp-content/uploads/2023/02/Panther-v4.pdf

Not showing the front bot adapter. Ill see if fxusa will be willing to answer / solve this issue.