P-rod mods and sources?

[steve-kville]

I googled this a little, but not extensively. I mounted the adapter and a AR stock and really like how it handles. Only down side, I have no sling attachments, even for a single point. Also, for night time pest control, it would be handy to either an M-lok or pic rail for a light.

Hopefully someone has been down this road before and would have some ideas.

 

[esingle]

Hello as for a sling look for the Tactical Tailor Urban Ops single point sling we used to use them on our job mini14s and not a bad sling but nothing like whats out today (just a simple sling that keeps the gun attached to you ) . As for a light there are many pic rails made to attach to a shotgun tube what might work for you just google shotgun light mounts. hope this helps Eric

 

[SHOMER]

Steve-kville What I mostly use on either the day shift Prod or night shift Prod are those velco single point wraps with a simple single point sling.

 

[MileHighAirGunner]

Some guys have mounted this to the Prod forearm https://www.amazon.com/HUNTPRO-Swivel-Picatinny-Adapter-Weaver/dp/B091NWTN28/ref=sr_1_36?dchild=1&keywords=sling+stud&qid=1634564566&sr=8-36

there's this also https://buck-rail.com/product/benjamin-marauder-pistol-forearm/

Buckrail also has this that will also fit the Prod tube. might be okay to mount a light or laser to it https://buck-rail.com/product/crosman-2240-dr-murfee-mount/

If you running a scope there's rings with built in pic rails to mount lights and such too. The Prod is pretty light though, so hanging a lot of accessories off it might make it top heavy. 

 

[biohazardman]

Here is one way to do it.

https://www.airgunnation.com/topic/simple-benjamin-prod-bipod-sling-attachment/

You can also just use these or similar with just machine screws and nuts and washers. Or drill your forearm screw hole larger and drill and tap your barrel band screw hole larger as well. Lots of ways to do these things and most are not too difficult.

https://www.amazon.com/Uncle-Mikes-MO10013-Swivels-Machine/dp/B000ATX9B8/ref=asc_df_B000ATX9B8?tag=bingshoppinga-20&linkCode=df0&hvadid=80126962060120&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4583726541038798&psc=1

 

[steve-kville]

Had a little time to look while at lunch:

Crosman 2240 Dr. Murfee Mount – Buck Rail (buck-rail.com)

(ETA- just saw someone else beat me to it!)

 

[JimD]

The fore end comes off easily and could be fitted with a sling swivel easily. I am unfamiliar with your butt stock but I assume it could be fitted too. The fore end has to pivot around the air gauge but if you mess with it a little after pulling the bolt it comes off.