I recently picked up a wild cat mk 11 in 25 cal.can the regulator be ajusted from the out side and can someone tell me the size of the breach Oring thanks
Thank youYes, according to the owners manual the regulator is externally adjustable. Here is a link to the owners manual on the FX USA website;
FX breech O ring part number is 2575
O-ring size is 6.35mm ID x 1.27mm CS
Material is NBR 70
Thank youAs long as the previous owner didn’t replace the reg with a huma. These are not adjustable without removal.
Just so you know, I just went through with my Impact. You cannot get the 6.35 X 1.27 mm size. If you request it from FX they will send you part #4526, a 6.4 X 1.3 mm instead. O-Rings and More sells that same size for 5 cents each, while FX charges $1.52 each plus $9 shipping.Yes, according to the owners manual the regulator is externally adjustable. Here is a link to the owners manual on the FX USA website;
FX breech O ring part number is 2575
O-ring size is 6.35mm ID x 1.27mm CS
Material is NBR 70
Yup thanks I order all my orings from oringsandmoreJust so you know, I just went through with with my Impact. You cannot get the 6.35 X 1.27 mm size. If you request it from FX they will send you part #4526, a 6.4 X 1.3 mm instead. O-Rings and More sells that same size for 5 cents each, while FX charges $1.52 each plus $9 shipping.
Impact Mk3 breech seal .25
The size for the .25 cal. is listed as 6.35 X 1.27. I usually buy from O-rings and More but they don't stock that size. Does anyone have good source other than FX?www.airgunnation.com