Options for filling gun and small bottle

[Dave]

I just ordered a new airgun that is feed by a 480cc bottle. Although, it's not my first big air reservoir gun (30 cal bobcat had that honor) I don't intend to pump the new one. My typical usage is low, so I think a buddy bottle that allows a couple of fills, and a compressor that can fill gun and a bottle that size would be my best option. Any thoughts and experience for some different options would be great.

Thanks,

Dave

 

[biohazardman]

Probly about the best you can do for under $1000 coming in at $300 is the Yong Heng compressor. More about it a few posts down.

https://www.airgunnation.com/topic/yong-heng-questions/?referrer=1

 

[wjwillia]

depending on how much you shoot you might want to look at getting a bulk nitrogen or compressed air bottle. I rent a 6000psi nitrogen bottle from a local welding shop and top off my scuba tank with it then top off my guns with the scuba tank. Cost is around $200/year. Good luck

 

[dizzums]

i have a yung hen and that would do it .. its a bulky complex setup though .. if you dont need to fill scuba tank size bottles what i would like to get is the 'tuxing' compressor .. its more portable and would be a much better choice for just filling a gun .. you can run them off a vehicle battery or the included transformer