sniperlabyoTuned a lot .25 and average shot count around 30-35 shots at 880 fps with 25g at 235b fill.
power tuned to shoot the 34g 900-910fps gets around 21-26 shots.
if you want more shots tighten down the valve spring 2-3 turns CW and lower the reg pressure so the speed max out to shoot the 25g at 865-875fps, don't tighten down the HSTS pass max speed.
Proper way to adjust HSTA:
lower speed to around 840 fps with 25g
turn hsta 1/4 turn CW and take 3 shots do this till speed no longer rise then turn hSTA CCW 1/4 turn. if you adjust the HSTA past that speed you are wasting air and loose shot count, plus the shot will get louder.
Oh nice. That power tune sounds interesting with the 34 grainers doing 900 fps. That must involve a hammer weight."sniperlabyo"Tuned a lot .25 and average shot count around 30-35 shots at 880 fps with 25g at 235b fill.
power tuned to shoot the 34g 900-910fps gets around 21-26 shots.
if you want more shots tighten down the valve spring 2-3 turns CW and lower the reg pressure so the speed max out to shoot the 25g at 865-875fps, don't tighten down the HSTS pass max speed.
Proper way to adjust HSTA:
lower speed to around 840 fps with 25g
turn hsta 1/4 turn CW and take 3 shots do this till speed no longer rise then turn hSTA CCW 1/4 turn. if you adjust the HSTA past that speed you are wasting air and loose shot count, plus the shot will get louder.
"hsnmz"
"sniperlabyo"
power tuned to shoot the 34g 900-910fps gets around 21-26 shots.
Anyone knows what does the power tune consist of?
Dear Ernest Rowe,"sniperlabyo"Tuned a lot .25 and average shot count around 30-35 shots at 880 fps with 25g at 235b fill.
power tuned to shoot the 34g 900-910fps gets around 21-26 shots.
if you want more shots tighten down the valve spring 2-3 turns CW and lower the reg pressure so the speed max out to shoot the 25g at 865-875fps, don't tighten down the HSTS pass max speed.
Proper way to adjust HSTA:
lower speed to around 840 fps with 25g
turn hsta 1/4 turn CW and take 3 shots do this till speed no longer rise then turn hSTA CCW 1/4 turn. if you adjust the HSTA past that speed you are wasting air and loose shot count, plus the shot will get louder.
What happens when the speed stops increasing but that's not what I'm going to do with my target speed?"jking"What he's saying is back the HS off a couple of full turns to get well below your target speed then start back 1/4 turn CW at a time until the velocity stops rising. This might take several 1/4 turn adjustments CW. Once the speed stops increasing then back it off just one 1/4 turn CCW.
jimmy
I see what you mean. I was wrong. Thank you for your answer.If you don't know, I will ask you again. Thank you"jking"I'm not understanding your last question too well liudeng.
jk
jorgemac
The Vulcan regulator its more efficient in the range below 230 bar. If you fill to 250 bar waste much more air."Matt247365"
jorgemac
Why are you filling to only 230 BAR? I fill my VULCAN .25 bullpup to 250 BAR as specified in the manual and I get 4 mags per fill no problem.
Matt