Omega CF tank Dual Guage Replacement?

I have this on a tank I just bought.
I'd like to be have a dual guage set up like my Great White.
I see Amazon cheap chineese options but am nervous to order.
options?

20250827_180500.jpg
 
I have this on a tank I just bought.
I'd like to be have a dual guage set up like my Great White.
I see Amazon cheap chineese options but am nervous to order.
options?

View attachment 589686
The valve you have appears to be a "Jubilee." I have two tanks with this valve and both valves are excellent. You might want to consider saving the cost of a replacement valve and just doing deadhead tests to determine the pressure in your tank.

JackHughs
 
well ....upon the first fill there was a leak in the valve at the tank. when I tried to drain the tank at about 175bar it took 30 minutes fully open to purge and smelled like a moldy garden hose.Valve removed and its corroded to hell.inside of tank has yellow s$%t spots in it.its going back to the vendor I bought it from.

View attachment 589726

View attachment 589724
SOMEONE was not very careful about removing moisture while filling! Bummer!
 
Last edited:
I called the vendor who I bought it from and they said well "sorry that's why we sold it cheap,we dont test them " It was not advertised as such.
It was cheap because it only has a year left and I fill myself so i'm not that concerned of the date.
We're it me, I'd get a Scott SCBA valve to replace the one on tank. MAKE SURE you clean inside of tank & dry THOROUGHLY. What brand is that tank? Scott valves can be had cheaply on Ebay.
 
Still not fixed!

It's strange when I open the valve.The air just slowly comes out.I hook it up to my gun and it fills the gun rather slowly but it never pops open the valve on the gun fully.
When I close the tank valve and open the bleed valve to drain the hose the valve on the gun is not closing and all the air in the gun bleeds out. It's not a gun issue because I checked and filled it with another one of my tanks.