I have a Walther Terrus .22. Was shooting fine. I check and tighten my stock screws every so often, or if I suspect a problem. So, last time I tightened the trigger guard stock screws it would not cock- meaning I could break the barrel and pull it down but it would not 'catch' and set the trigger. I experimented and found I could tighten the rear screw all the way, but now can't tighten the front screw at all. Now any tension at all there means it won't cock. Needless to say it is not very accurate shooting like this!
Any idea why this would be and how to fix??? A couple months ago I took the trigger apart a polished and lubed it, but it has been working fine for a few thousand rounds.
Any idea why this would be and how to fix??? A couple months ago I took the trigger apart a polished and lubed it, but it has been working fine for a few thousand rounds.