Just had a slug power kit installed in my FX M3 (600 mm) and there is no power increase after the kit has been installed. With 185/160 reg pressure and macro wheel 16, micro on 5 and the valve at 4+ lines in am able to shoot the .217 JSB Knockout at 940 FPS which is the same as before installing the slug power kit. Anyone that has experienced the same and any ideas to what cold be the issue?
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Tuning Now power increase after installing a slug power kit in my M3
- Thread starter tfjensen
- Start date
What parts of the slug power kit were installed? The M3 only uses the hammer weights/spacers and the probe. If only the correct parts were installed I would start with the pellet seating depth. The probe needs to be adjusted so they are seating properly.
Upvote 0
The kit was installs by dealer and is the FX kit including hammer weights / spacers, spring, rubber ball and the probe.
Upvote 0
Problem solved - I replaced the spring with the original and removed the small rubber ball and not it is shooting the Knockout at 1050 FPS - thanks for pointing to the problem
Upvote 0
M3 just need the dual hole TP and pin probe for slugs. The slug kit was not designed for M3.
Upvote 0