NOVA VISTA FREEDOM/LIBERTY DonnyFL SUPPRESSOR ADAPTERS ARE NOW IN STOCK!

[DirtyDovi]

Hi everyone!

As promised, here's my update: 
The ATI Nova Vista Freedom/Liberty [Seneca Aspen] DonnyFL Suppressor Adapters are ready and in stock on Donny's site!

I installed mine on my Freedom, and as always - The fit and finish of the adapter and thread protector are fantastic!
Threads are so precise that with a finger/thumb snap, they'll thread on/off in one fluid motion. As top notch as it gets!

I just moved into new digs, and the 1st order of business was to set up my new 10 yard indoor range, 
and get the adapter installed and a suppressor on.. Done & Done.

I've used the RONIN and the EMPEROR V3, and it is Un-Real how quiet the Freedom is..
I fired the 1st shot, and the only thing I heard was the pellet smacking the target/backstop 3 rooms away. Killer!

This shot is the funniest - as the suppressor is almost as long as the rifle. I called it the Freedom "SE" 
*Silent Edition 
*Sniper Edition
Maybe a better nickname would be the "SS" 
*Silent Sniper

Hahaha

 

BIG Thanks to Donny! This thing is absolutely Awesome!

Heads up for everyone else - Get em' while they're hot!  

 

Sam -

 

[S97]

Many thanks for the report.

I just purchased the same rifle. Will probably go this route as well. In terms of decibel reduction, what do you think you are getting?

 

[DirtyDovi]

S97,

You're very welcome!

And here is the direct link:
https://donnyfl.com/collections/adapters/products/nova-vista-liberty-1-2-x-20-a50

As far as sound levels, unfortunately, I don't have a DB meter - only my ears..
I shoot indoors in relatively small rooms, so, I judge by sound and echos..

On high power, the snap of the Freedom [Probably the same for the Liberty]
used to be quite loud, and I'd also get a harsh echo..

With suppression, I don't hear either one..

I've used Donny's RONIN and the EMPEROR V3, and literally, the only sounds are
the soft 'plink' of the action, and, the 'smack' of the pellet hitting the target/backstop.

If it is that quiet indoors, I can only imagine that outdoors it would be almost silent.



Sam -

 

[gungeek85]

That's a great set up, I'm glad you are getting such a good results. I'm in the market for a much smaller suppressor so I don't make my Seneca too long. What would you recommend??

 

[DirtyDovi]

gungeek85,

Thank you, and Yes.. I've been getting fantastic results with the setup - Using two different suppressors - from Donny.. 
The two that I use are pretty big though - Definite over-kill. haha

If you're interested in something very efficient yet still relatively compact, two of his smaller models come to mind..

The "Tanto" coming in at 1.22" x 5" [ $99 ]
And 
The "Tatsu" coming in at 1.6" x 4.25" [ $130 ] 

https://donnyfl.com/

When you see the selection up top, they'll be the two towards the lower-right..

The Tanto will be longer / thinner 
The Tatsu will be shorter / chubbier 

And if you do end up opting to go with a suppressor, make sure to order 1 caliber size up from what your rifle's cal is.
So if you have a .177, order a .22, If you have a .22, order a .25
That way, as the pellet leaves the barrel and travels through the suppressor, there is little/no chance of it hitting [ "clipping ] 

Hope that helps!



Sam -

 

[gungeek85]

 

Great piece of information, specially about getting a higher caliber. I wouldn’t have thought of that. I will go ahead an place an order. Thank you so much for responding to my question in a timely fashion. I appreciate it

 

[DirtyDovi]

Hey, You're very welcome,
and I'm glad to hear that my little ramble helped out! One more thing about going with 1 caliber size up.. 
Should you end up getting a rifle of the higher caliber later on, then you can also use the suppressor on that as well.
Then you have a multi-caliber compatible setup - so to speak.. 

Good luck! 

 

Sam -

 

[Sniper_chile]

 



internal disarmament suppressor Donnyfl



https://www.youtube.com/watch?v=76y5qMNpewE