Notos trigger

[Rawroots]

Nice little gun, but trigger pull was tuff, figured future trigger work like most others, then i was ordering some pellets from PA and i asked the man if he liked the notos and he said he also bought one, i commented on stiff trigger and he asked if i tried adjusting it yet, thinking it wouldn't help much i went ahead with one tiny exposed screw, WOW NEVER HAD A TRIGGER ADJYSTMENT THAT EASY EVER, This gun went from nice to awesome.

 

[cra627]

Good to know thanks

 

[marflow 777]

the Notos looks to be a Snowpeak product, the safety button is the same as the Chaser and with that i wonder if there is another grub screw hiding under the grip area and if the trigger assembly isn't like a Chaser setup
just speculation

 

[KatoKevin454]

if you round off the adjuster screw and polish it, it will be even better, that's what we've all done...

 

[Chukar60]

I am considering one of the Notos for a leave at the ranch with a hand pump gun For starlings and such. Reading these Notos threads with interest.
Good info here. I shot one at the local range and liked it other than the trigger. Very helpful.

 

[Long_Gun_Dallas]

Yeah, looks to be a souped up pp750

Same trigger as a lot of their guns, pp800's included. Tons of posts about making these triggers better. I have one at 8oz break (target 177 pistol) , and another at 18oz (48fpe, hunting pistol)

 

[Reg Creep]

Yeah, looks to be a souped up pp750

Same trigger as a lot of their guns, pp800's included. Tons of posts about making these triggers better. I have one at 8oz break (target 177 pistol) , and another at 18oz (48fpe, hunting pistol)

Sorry for the thread drift...

What pcp pistol do you have set up shooting 48 fpe?

 

[Long_Gun_Dallas]

25 cal pp800. I fitted a Cothran valve to it. Didn't take a ton of work. I made a thread about it here. https://www.airgunnation.com/threads/shoehorning-a-cothran-powerhouse-valve-into-a-pp800-25.1271727/

But wasn't exactly easy and took some specialized tools/hardware. And a lot of patience. Does 65fpe in the 15" barrel.

 

[marflow 777]

now the PP800 has the same trigger as the Chaser, it is a Bandit
https://airgunwarriors.com/communit...er-mods-for-those-who-like-to-improve-things/

 

[Long_Gun_Dallas]

So if youve seen the bandit/pp800/stormrider, and im sure several other models, the internal trigger bits all look the same, including the 750

 

[tsmith]

if you round off the adjuster screw and polish it, it will be even better, that's what we've all done...

can the trigger adjustment screw be removed with the gun fully assembled to smooth it off? want to make sure that something internal wont come apart if i do.
thanks!

 

[Dairyboy]

can the trigger adjustment screw be removed with the gun fully assembled to smooth it off? want to make sure that something internal wont come apart if i do.
thanks!

Yes it can

 

[miksatx]

I always change out the sear spring for a cut down bic lighter flint spring of the same length. Any body else do it?

 

[tsmith]

I always change out the sear spring for a cut down bic lighter flint spring of the same length. Any body else do it?

View attachment 366928

how much does it take to get the gun apart like in the pic?

 

[miksatx]

If you have the stock on it‘s 4 stock screws and 2 3mm screws. And it drops off the bottom. Watch out for the sear spring in it lol.

 

[Geezerhood]

The trigger on my Notos is as light as I would want it on a hunting gun with no mods other than turning out the screw a bit. Very happy with the Notos so far. Going to buy several more for kids / grandkids.

 

[marflow 777]

the sear is typical Snowpeak, not a CP1 or CO2 Chaser as rhe reset sear spring is no in the same spot
these picture are of a rebuilt Chaser trigger group, from grub screw, shims, new pins, trigger stop
could the ideas be used on the Notos

 

[Clazy]

Just screwing it in some made it much much nicer. All I need for now.

 

[Firewalker]

I have had zero luck maintaining a working safety with the trigger weight below #2.

Has anybody had any luck balancing a light trigger with a working safety?

 

[DeanB]

Ive got mine set at 1# 14 oz but it took forever to get it there, just tiny adjustments on screw made a big difference.. safety works fine passes bump test etc. I did back my screw all the way out and put a drop of blue loc tite on it as it kept changing weight from vibration of shooting/cocking gun.