pic rail is all one piece and part of the shroud.. only separate items are the barrel, shroud tube and a rear not threaded bushing
Upvote 0
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Umarex Notos O ring List- Lets put them ALL here
- Thread starter EmptyTin_Tim
- Start date
I installed the 1mm CS x 10mm ID rings yesterday. They were tight enough I needed to lightly hammer the barrel in with a 2x4 piece..
I thought hey that's gotta be good-make a seal.
Here are results with FX Atomics
Full pressure
1 complete HS turn in from all the way out (I think 1st shot low b/c I had silicone grease everywhere lol)
730.5, 739.1, 740.9, 739.1, 741.8, 744.4, 741.8, 740, 743.6, 742.7, 745.3, 743.6, 743.6, 744.4, 748.9, 750.7, 745.3, 743.6, 748, 742.7, 747.1, 750.7, 749.8, 740.9
End ~2,400 psi left (took 24 shots, obviously could shoot more to my 1.9k reg dropoff but it was 2 CARM mags and the last of my tin)
Ave FPS 743.6875
Ave FPE 19.53
It was more than before I installed the plenum kit by 5 FPS but it's making me wonder if I should also try to replace the inner o ring (one bolt goes through).
I have enough extras that I may try it out but in the meantime I did order these that @billhill got from Ali. I did 55 sets which got me >$20 so I got $3 off coupon. I think it means I'm getting 550 0.8mmx10.2mm rings coming on a slow boat.
Just ridiculous we can't have standard sizes... makes me want a lathe to widen the o ring slots in the OD of the barrel so we can use 1mm CS x 10mm or 10.5mm rings.
Where are people at for shot count? I just passed 1,000 pellets. Wondering if that makes my spring broken in and it is a normal amount of gain for plenum. I need to play with it to see where 97% of max FPS will get me with what HS setting so it is more efficient.
Also, sorry haven't gotten the dB meter out recently, I've been busy. But I did get a non tapered Buck Rail to test out.
I thought hey that's gotta be good-make a seal.
Here are results with FX Atomics
Full pressure
1 complete HS turn in from all the way out (I think 1st shot low b/c I had silicone grease everywhere lol)
730.5, 739.1, 740.9, 739.1, 741.8, 744.4, 741.8, 740, 743.6, 742.7, 745.3, 743.6, 743.6, 744.4, 748.9, 750.7, 745.3, 743.6, 748, 742.7, 747.1, 750.7, 749.8, 740.9
End ~2,400 psi left (took 24 shots, obviously could shoot more to my 1.9k reg dropoff but it was 2 CARM mags and the last of my tin)
Ave FPS 743.6875
Ave FPE 19.53
It was more than before I installed the plenum kit by 5 FPS but it's making me wonder if I should also try to replace the inner o ring (one bolt goes through).
I have enough extras that I may try it out but in the meantime I did order these that @billhill got from Ali. I did 55 sets which got me >$20 so I got $3 off coupon. I think it means I'm getting 550 0.8mmx10.2mm rings coming on a slow boat.
Just ridiculous we can't have standard sizes... makes me want a lathe to widen the o ring slots in the OD of the barrel so we can use 1mm CS x 10mm or 10.5mm rings.
Where are people at for shot count? I just passed 1,000 pellets. Wondering if that makes my spring broken in and it is a normal amount of gain for plenum. I need to play with it to see where 97% of max FPS will get me with what HS setting so it is more efficient.
Also, sorry haven't gotten the dB meter out recently, I've been busy. But I did get a non tapered Buck Rail to test out.
Upvote 0
I found them on AliExpress, another thread gave the link. 10.2*.8, I have a bunch on the way.
Upvote 0
Great find, I've search but have not been able to find the exploded parts diagram. Would you please share a link or the pdf file?
Thank you.
Upvote 0
They were sent via email from Umarex and were mistakenly deleted some time ago. Screenshots are all I have left. I’m sorry that’s all I could share.
Upvote 0
I do not know this seller, Notos o-ring kit https://spares.bagnallandkirkwood.co.uk/product/umarex-notos-full-o-ring-seal-kit/
Upvote 0
Got my aliexpress o rings in and also installed 70 duro for inner barrel probe o ring, hoping to see results. The o rings I had on the outside from o ring store were all chewed up from pushing the barrel in when they were too big so I am very thankful for the link to the aliexpress o rings!
Upvote 0
