Hey Everyone! So I have been shooting the hell out of my new FX Wildcat MK2 in .30 cal and I do like the gun. I've put about 1000 JSB's through it and it is pretty accurate. That being said, it will not hold zero for me. I have a Hawk Sidewinder FFP 6-24x56 scope on this gun. I had it zero'd from Utah Air Guns when I bought it and when I first shot it the gun was off by 6 inches high. I zeroed it at 40 yds and it would not hold zero. I called U A G and they recommended to check the scope mounts and tighten all the allen bolts first and recheck it. They also said to check the shroud and moderator (factory FX) which I have done. Now, after giving all the fasners a little twist it seemed better but, it still will be off 1 to .5 MOA @ 40 yds from day to day. I have re-zeroed it 4 times and will shoot dead on that day and maybe the next but will eventually go out to 1 MOA . It will drive tacks once I find how the gun is shooting that day but I WANT THE SCOPE DEAD BALLS ON ZERO! Is this a normal pcp gun issue or do I have something else going on here!