Turn power on nomad 2. Then when I hit the on button to start, it pumps for 2-3 seconds then shuts off. First time this happened. Anybody know what’s going on?
Nomad 2 problem
- Thread starter lancehenley1
- Start date
I have not had that problem but fear that it will happen on my Nomad 2 so I'm watching this. Have you tried checking the fuses?
Good luck!
Good luck!
Upvote 0
It won’t run if the fuse has blown. How long have you had it? Mine lasted 14months of light use, probably 10 hours at most with 255 bar fills. If it’s out of warranty you might pull it apart and change the springs and valves in it. They are in your kit.
I changed all mine and it built Pressure to 230 bar then the bearing that drives the compressor pulled the threads out of the cam and I don’t really want to put $$$ to fix it, it might not be the only issue with mine.
You could also have a fried motherboard.... mine was sent to AV last month for a bad motherboard. It hasn’t worked right since though.
I changed all mine and it built Pressure to 230 bar then the bearing that drives the compressor pulled the threads out of the cam and I don’t really want to put $$$ to fix it, it might not be the only issue with mine.
You could also have a fried motherboard.... mine was sent to AV last month for a bad motherboard. It hasn’t worked right since though.
Upvote 0
Have you opened relief valve before start? I mean empty compressor, turn Off or unplug then turn back on. If air is in compressor after it stops it will stall. second time I filled is when i learned about that safety feature.
Upvote 0
mine does this. open the relief valve and get it started. when the screen reads 17-18 close the valve. works every time on mine.
Upvote 0