Purchased new from Wild West Airguns in 2013, full o-ring replacement in late 2017. Holds air like a champ. 24.5” long overall, with a ~15” barrel. Gun internals are all OEM/stock. I added the wood cheekpiece, sling studs, and custom-machined aluminum barrel cover and shroud spacer.
Currently set up for JSB 15.9 gr at 850 FPS for 25.5 FPE. ~48-50 shots per fill from 200 bar to the 115 bar reg set point (~250cc reservoir)
Some light finish wear on the picatinny rail from mounting rings, and a couple of small marks on the anodizing of the air tube. Plastic OEM hammer spring adjuster has some light marring around spanner-holes. All these are shown in the pictures, none affect function.
Includes:
$925 shipped, CONUS only
Reasonable offers considered,no trades please. would trade for FX Dream-Lite Compact or Dream-Tac Compact in .177 or .22 (I can add cash dependent on accessories)
Paypal (FF or +4%), USPS Money order, or personal check (must clear before shipment).
First time selling an item on AGN, but happy to provide references from other forums/sites if desired (via PM).
Thanks for your interest!
*Void where prohibited, buyer responsible for verifying legality in their area, must be 18 or older to purchase. By purchasing, buyer asserts that they are compliant with these conditions and local ordinances. *
Currently set up for JSB 15.9 gr at 850 FPS for 25.5 FPE. ~48-50 shots per fill from 200 bar to the 115 bar reg set point (~250cc reservoir)
Some light finish wear on the picatinny rail from mounting rings, and a couple of small marks on the anodizing of the air tube. Plastic OEM hammer spring adjuster has some light marring around spanner-holes. All these are shown in the pictures, none affect function.
Includes:
- Cricket Compact .22 with black soft-touch synthetic stock (sling studs installed)
- 2x magazines (14 shot), fill probe with foster fitting, barrel alignment/reassembly set screw
- Wood cheekpiece (finish: spray on bedliner + plasti-dip)
- Custom aluminum barrel cover and shroud spacer (finished in Wheeler Engineering black Ceramakote).
- Ernest Rowe hammer-based degassing tool (no need to use bleed screw)
- Delrin regulator plenum reducer plug – not installed
- Reduces plenum volume from ~17cc to 5.5cc, for low power applications, combine with regulator pressure of 65-70 Bar for ~15 FPE and 150+ shots per fill (from 200 bar)
$925 shipped, CONUS only
Reasonable offers considered,
Paypal (FF or +4%), USPS Money order, or personal check (must clear before shipment).
First time selling an item on AGN, but happy to provide references from other forums/sites if desired (via PM).
Thanks for your interest!
*Void where prohibited, buyer responsible for verifying legality in their area, must be 18 or older to purchase. By purchasing, buyer asserts that they are compliant with these conditions and local ordinances. *