I bought a Ninja 90/4500 tank & PCP fill station when installed together can't turn off /leaks thru quick disconnect
Don
Don
Ninja Tank question
- Thread starter greend1128
- Start date
Ha I din't know there was a ninja tank, I did a double take because my user name is ninja lol.
Upvote 0
The valve on the regulator is open so it leaks out the hose /quick disconnect
Ninja makes regulator adjustment clips similar to a washer that goes between tank & what ever
wonder if this will solve issue
Don
Ninja makes regulator adjustment clips similar to a washer that goes between tank & what ever
wonder if this will solve issue
Don
Upvote 0
Does it leak when its conected to the gun? Does it leak with the tank valve closed? Air will come out the hose if its not connected to the gun and you open the tank valve, this is normal even with a regulator. I'm not familiar with Ninjas stuff. Just trying think it though. I have a Airtanksforsale.com Tiger shark 4500 carbon fiber setup. I am looking at a photo of the Ninja set up. The regulator valve likely will not shut off the air flow, if that is what you are trying to do. They are made to set the output pressure you want for the gun then be left at that setting. Use the tank valve to turn on and off the air. Just throwing stuff out to see if it may help. Good luck!
Upvote 0
I bought my ninja tank from Amazon 90ci, 4500 psi
mine is perfect when I go hunting, for that quick fill up.
mine is perfect when I go hunting, for that quick fill up.
Upvote 0
If you get a Ninja tank setup you must get one setup for PCP as the paint ball rigs have a 500 to 800ish regulated output. Useless for a gun with a 3000 fill pressure.
Upvote 0