New year gift—Lelya Edgun

[kstarxu]

Finally after 1.5 months waiting, she is here on my bed with lucky series number 0889

cheers and thank you Eduward

Compared with my Leshiy, she’s different style at all. Bit longer, heavier but more shoots.

Not quite familiar with digital watch’s operation and little concern with pallets loaded and even with safety on.

more to share soon

one question... I filled with 249 bar in last night and now 12hrs later... shows 243 Bar ... is there any place keeps leaking?

 

[Glem.Chally]

The pressure change might only be the tank cooling after a fill. See if it continues to drop.

 

[Peskådot671]

Yes. Glem is correct. I noticed this with my R5M Standard. If you fill it too fast, feel the air cylinder. You'll notice it's warm to the touch. I also noticed that after it has settled, and based off the EDMU, you'll see a 1 to 2 BAR difference. It will raise during the day time and drop during the evening depending on the weather. 

 

[kstarxu]

Thank you Glem and Pes

i use a hand pump to fill the tank and weather here is freak which closes to subzero even in my room.

Add one more pic about shoot performance 

5.5|JSB 1.17

30 meters /10shoots

0 shoo

 

[Peskådot671]

That's some crazy temps! Good shooting.

 

[Cranky1]

The more you shoot it the better it will get, but clean the barrel when accuracy seems to drop off. Congratulations on the new gun, they are tough and simple to work on. 

 

[davidsng]

Heat/cooling is a reason for loss, but there is another.

When you drain/bleed the hose, you lose a few bar. 

For example: You fill it to 250 bar, close your tank valve it is still 250. Then check again it is still 250, then you bleed it, just for a second it will drop before the port's valve closes. So, it you want 250 bar fill to 255bar.

Check it out it's what happens on my Lelya and all of my other guns.

 

[Michael]

Like others have said, your psi/bar will decrease as the air cools inside your tube. 

Manufacturers will sometimes fill > let cool, fill > let cool, 3 times before they record the actual specs. Which will give them the highest possible shot count.

 

[kstarxu]

New case 

 

[BigTinBoat]

 

If I fill my Leshiy to 250bar inside the house (70), when I get to my hunting spot in 30 degree weather it will be reading 230bar. Take it back without shooting, put in in the house and check it later it is right back to 250bar.

 

[mcoulter]

Manufacturers will sometimes fill > let cool, fill > let cool, 3 times before they record the actual specs. Which will give them the highest possible shot count.

I saw that exact behavior shooting this winter (temps around 30f). I was surprised how many more shots I got... a normal fill gives about 90 shots in my Bigmax but when I did a series of top-offs, that shot count went up to 120 and probably could have been even 130 rounds without much drop in velocity...