Got mine a few weeks ago. Great pistol from a great dealer. Too bad the mods here are about financial gain rather than helping the air gun community. Now back to my usual forum where “everyone knows my name “ .
CHEERS
CHEERS
Upvote 0
New SPA Artemis PP750
- Thread starter RJGTA
- Start date
Finally
Yesterday I got a my new toy (PP750)
Which scope do you recommend ? My Ccrosman 2x20 scout does not work, have too extra long eye relief
Yesterday I got a my new toy (PP750)
Which scope do you recommend ? My Ccrosman 2x20 scout does not work, have too extra long eye relief Upvote 0
Low as you can go, keeps near zero closer and trajectory as flat as possible.
I like the lightweight UTG 3-12 x 32 UTG BugBuster, but the gun easily out shoots it doing 1/4 inch groups at 25 yds
I like the lightweight UTG 3-12 x 32 UTG BugBuster, but the gun easily out shoots it doing 1/4 inch groups at 25 yds
Upvote 0
I try to use 3-12 x 32 UTG BugBuster, but that scope have short eye relief (3") and is impossible to shoot with (for me)
Upvote 0
I had a similar issue with LOP being too long for eye relief.
Reduced LOP by adding new, shorter channels to rails, marked rails by holding with comfortable eye position.
In stock form this gun has a singular setting, long LOP. Super easy to add multiple settings.
Reduced LOP by adding new, shorter channels to rails, marked rails by holding with comfortable eye position.
In stock form this gun has a singular setting, long LOP. Super easy to add multiple settings.
Upvote 0
Thane, I'm assuming you are referring to Dremeling out "stops" in the stock with a grinding bit??? If so, what diameter stone did you use for best fit? Didn't you have pics in an earlier post somewhere?
Hoot
Upvote 0
I used a lathe to add matching channels to stock rails.
A drill motor and metal file would also work, chucking up the rods and turning channels.
A drill motor and metal file would also work, chucking up the rods and turning channels.
Upvote 0
The shroud rotates along with the cap. And I don't want to ding the front sight up against the air tube.
Upvote 0
Pull off the dust cover. Then the sight won't hit. It's not easy to get that front cap off on some. I was able to manage it by putting a cloth in the vise and then clamping onto the end cap and turning the shroud by hand.
Upvote 0
I have managed the external reg gauge, but tinkering
How that would be possible to make an external regulator?
How that would be possible to make an external regulator?
Upvote 0
SO my pp750 showed up yesterday, havent shot it yet, but pretty happy with how it feels! maybe this weekend i will be able to get my hands dirty and this thing cleaned up.
Mine doenst have any baffles in it, just some alum spacers, has anyone printed their own baffles? or a cheek rest?
Mine doenst have any baffles in it, just some alum spacers, has anyone printed their own baffles? or a cheek rest?
Upvote 0
Mine arrived today - tore it down apart from the air tube,
very Impressed with the build quality - waaaaaay better than the Die-cast and plastic HW44 I had.
But FFS whats going on with the hammer and valve spring, Look like they belong on chinese tractor. when refitting them they are under tension!!! So I need to source softer/shorter Springs
Oh and also, all the O rings i came across were dry or at best lube with 3in1.
Overall though I reckon there is a peach waiting to come out.
very Impressed with the build quality - waaaaaay better than the Die-cast and plastic HW44 I had.
But FFS whats going on with the hammer and valve spring, Look like they belong on chinese tractor. when refitting them they are under tension!!! So I need to source softer/shorter Springs
Oh and also, all the O rings i came across were dry or at best lube with 3in1.
Overall though I reckon there is a peach waiting to come out.
Upvote 0