New owner with concerns

[josh3rd]

Bosco I GOT to try it at least once but then it loses even more value. But nothing ventured nothing gained

 

[josh3rd]

James I would like to take you up on the offer

 

[L.Leon]

Ok first James thanks for the offer...its greatly appreciated. Also I will let you know about where it and the barrel is made. 2nd L.Leon, how So no go about getting or making this adapter? 3rd, you have the right idea of the trade. Thanks in advance

Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal



you can can get it at Pyramid Air

 

[Eaglebeak]

If you decide to get a handpump, you won't need a male Foster fitting. Just remove the female fitting from the end of the hose and replace it with your fill probe. They are both 1/8 BSP. You may need to replace the washer or use some Teflon tape depending on the interface on the fitting ends. It will be there semi-permanent and you won't have to worry about losing it. The Urban can be filled to 3300 Psi and is easily doable with a hand pump but it has a really flat velocity curve between 2800-2000 PSI so if you're hand pumping, you'll get the best results at that pressure but it may cut the shot count by a third or so. If you have access to a SCUBA tank, I say go for it but like has been mentioned, you'll only be able to utilise the top 15 or 20% and they will probably charge you for a full fill each time you top it off. I think that once you try a PCP you won't wat to go back. The Urban does have a BSA made in England barrel and loves JSB pellets. It's a gift. You have to at least pretend you like it. I think that you will be pleasantly surprised.

 

[josh3rd]

Eagle stay tuned for my quick write up about it. Just got done shooting and cleaning it. I just cant get the stock off and can only adjust 1st stage. The 2nd stage is adjusted via Phillips head screw. Wtf?