Seneca/Sam Yang New(ish) Seneca Aspen 22 sitting in the box for 5 years

[Murfdurf82]

This is My new 22 cal Seneca Aspen picked up on line bid auction for 100$. Once I lubed and pumped my adapter blew off and I had to lube the O rings and eventually the next leak was the tube extension check valve. Multiple attempts of lubing and pushing the tip around the the gasket, bearing and spring it sealed up. Oh ya so was running thru the guys city 2 weeks after I won the auction in vacation so I didn't have to pay shipping anyways.... 10 attempts (24 hrs) at lubing, pumping, dry firing/degassing lube and air and its holding at 3000 psi for 2 hrs. I'm gonna Chrono it in the next few days. It's shooting beautifully but I need a different mount set up as this is just rigged to test fire. I'll post Chrono on several pellets and a good slug. I'm PUMPED to pump this test up!

 

[oldmojo]

I've been wanting to find one of those

 

[Mike_Lenardon]

Awesome find, congrats.

 

[DesertSilver]

Lube the heck out of the pump. Once you find the sweet pressure you like take a shot then pump it up to that usual 5-6 pumps then repeat. Your pump will last a long time that way.

Forgot to say use silicone oil and make sure it's 100% silicone oil.

 

[Murfdurf82]

This is My new 22 cal Seneca Aspen picked up on line bid auction for 100$. Once I lubed and pumped my adapter blew off and I had to lube the O rings and eventually the next leak was the tube extension check valve. Multiple attempts of lubing and pushing the tip around the the gasket, bearing and spring it sealed up. Oh ya so was running thru the guys city 2 weeks after I won the auction in vacation so I didn't have to pay shipping anyways.... 10 attempts (24 hrs) at lubing, pumping, dry firing/degassing lube and air and its holding at 3000 psi for 2 hrs. I'm gonna Chrono it in the next few days. It's shooting beautifully but I need a different mount set up as this is just rigged to test fire. I'll post Chrono on several pellets and a good slug. I'm PUMPED to pump this test up!

I cut 2 dovetail x picatiny adapters down to size until some nice rings i ordered come. It's not bad. The scope is a cheap, simpleMidTen 6-24x50 AO Rifle Scope for... https://www.amazon.com/dp/B0D6VQY2MJ?ref=ppx_pop_mob_ap_share it's well rated and simple but it's a clean view. So total expense is 200$!!!, 20$ pawn shop case, 50$ scope, 30$ in mounts. Got super lucky, now I'll post some Chrono and check out accuracy. I've heard good things, time to see