Hi evervone, Just bough my first PCP airgun.Im having a large problem trying to bring the bolt to the rear in order to cock the rifle.It feels gritty and it takes a lot of effort to cock it. Are there any adjustments that can be made to make cocking the rifle easier? Thank You Tom.
New Hatsan Flashpup .22cal
- Thread starter TommyG
- Start date
Welcome to Hatsan. They all need to be taken apart, wiped down, then put back together. But, don't expect miracles. Those bolts on most lower end rifles are never perfect like a daystate.
Upvote 0
The machine work inside the receiver is really ruff. Take the gun apart, wrap 150 or 180 sandpaper around a wooden dowel or something you can chuck in a drill to smooth it out. Molykote grease is 65% molybdenum sulfide in a silicone grease carrier so it's safe for o-rings and it's really slick and long lasting. You can even put some on a pellet and shoot it after cleaning the barrel. It keeps the barrel from leading.
Upvote 0
I tried taking the end cap off but after unscrewing the 2mm screw a little bit the end cap will only turn 1/4 of the way in either direction.I don't want to force it because im afrade ill damage something.Any suggestions?
Upvote 0
Well I took a chance and played with the end cap with my BIG flat screw driver.Got it I to turn counter clockwise.Did my adjustments and now I can say I see quite a difference in cocking the hammer spring.I think I turned it out 3 revolutions.Thank you.
Upvote 0