Tuning New addition to the M3

[jeepinmt59901]

Looks Good

 

[Jayman07770]

Removing the valve off the old bottle or installing a new valve. You’re going to need some kind of tool to insure it’s secure. I don’t plan on doing something like this often so there’s no need for me to buy a special tool. I used an old 30mm leveling ring and drill a hole towards the edge so a drill bit can engage the valve hole. Insert assembly into a clamp than loosen or tighten the bottle by hand. 

 

[biohazardman]

That's a great, quick and easy, low cost solution you figured out there!