New 26mm 300bar Huma Gauge for Crown and Royale Shooters

[jking]

Looks like Huma is now selling a replacement gauge for the Crown and Royale series. The stock holes for the gauges on my Crown are 26.53mm and the Royale is very similar. They have the larger easier to read display and a brass external body so they should hold up well. From a personal experience over the years the FX gauges are too fragile and easily damaged beyond repair. When your taking off the stocks and the plastic gauge housing pops off something needs to change.

Good job Huub

Jimmy

https://www.huma-air.com/Fx-replacement-pressure-gauge-26-mm-round-model

 

[blackpowderpete]

I have often wished that all gauges would be of the Anschutz/Steyr level of quality. 

 

[Bob_O]

Too bad there wasn't a gauge like this with a top end of like 200bar for more precise reg settings.

 

[Tomiboy]

I'll get two of these when they release the Crown regulator. 

 

[Tomiboy]

I just checked and they show a regulator for the Crown! The drop down ordering boxes are a bit confusing though

 

[2D1C]

I ordered the gauges for my Crown. The timing of this post Is interesting because after months of fussing with this gun I never once had an issue with the factory gauge covers coming off. I even bought a spare after reading about how delicate they are. Then yesterday? popped um both off. I bent the dial on one but got it fixed. I could not for the life of me find the other one. Unscrewed that sucker and in went the spare. Fast forward today, was cleaning up and setting up the chrony to check velocity before going to the range, Looked at my gun vise and there sat the flippin cover perfectly straight up in the barrel yoke! HAHA. I almost bought that reg but this is shooting so well right now I don't see the need. I am waiting to read what others think first.

Thanks for the heads up Jimmy!



Dennis

 

[Glem.Chally]

Jimmy even gave Huub the idea for it! Nice work Jimmy and Huub i bet these will come in handy.